This site uses cookies. Cookies are used for user guidance and web analytics and help to make this website better and more user-friendly.
If you do not want a recording, you can disable it under Legal notice & privacy statement
  • Two trolleys on one auxiliary bridge plus a fixed hoist
  • Clearing the flame cutter unit with the auxiliary hoist and a reeved magnet
  • 3/3 inclined rope stabilisation allows very quick manoeuvring
  • By using two magnet hangers, the various lengths of plate can be handled very flexibly. The magnets can be folded so that the plates can be transported both vertically and horizontally
Would you like to print the result with or without pictures?
The task for this crane is to store plates of up to 3m x 12m and feed the flame cutter unit. The plates are aligned with the direction of travel of the crane as the flame cutter unit is also aligned this way. In order to be set up as flexibly as possible for short and long plates, two trolleys are aligned on an auxiliary bridge.
The distance between the trolleys on the auxiliary bridge can be adjusted. The auxiliary bridge itself is another trolley of a larger crane bridge with a total of 8 running wheels. Both main girders are 10m apart and connected with coupling bars. In addition, an auxiliary hoist is installed at the end of the auxiliary crane bridge with an inclined rope stabiliser and a single magnet for clearing the flame cutter machine.
Of course, the magnet crossbeams are stabilised by patented Voith inclined rope stabilisation in the directions of travel of the crane and trolley. The foldable magnets allow plates to be transported both horizontally and vertically.
Design: Double girder crane bridge with one trolley on the underside and two on the upper side
Capacity: 2 x 6,2 t
Crane group: H3 E4
Wheel track: 16.220 mm
Lift speed: Full load 0 - 7,4 m/min; part load 0 - 19,8 m/min
Trolley speed: 0 - 40 m/min
Crane traveling speed: 0 - 63 m/min
+43 7229 70 270 - 0